Vantage Race F3G Electric, Neon Orange, Fully Loaded

CCMSKU: CCMVTRGO

Price:
$ 2,599.99
Stock:
Sold out

Description

Vantage Race F3G Electric, Neon Orange, Fully Loaded

F3G wings are similar strength and weight as F3B.

Fully loaded kit- Includes all covers, all ballast, IDS installed.

IDS installed for KST X10 servos, Mini/Pro

The Vantage Race is the next evolution of the Vantage design from CCM. The new model is aimed at complimenting the original Vantage in good to very good lift conditions where as the original model was aimed at light to moderate conditions. Much attention was given to making the new design an easy turning model with a " good-natured flight behavior".

Philip Rosenthal- 

"In keeping with this quote, we have also incorporated a number of structural changes to the V.race. For example, the wings are now held to the fuselage by two connectors. This ensures greater rigidity of the wing due to the additional spar web between the connectors. The ballast chamber is still very close to the center of gravity and is loaded with square ballast pieces. This means that you no longer have to pay attention to the correct alignment of the ballast pieces, which allows for quick and easy reballasting, especially in competitions. The fuselage nose has shrunk and the tail unit has grown a little.

Since the wings of the Vantage fit the fuselage of the V.race, we are responding to the wishes of many customers and are offering an upgrade for the Vantage for even better handling in very good conditions."

Comment by designer Mario Perner-

In fact, Vantage and VracE have the same root airfoil and the positions of the torsion pins, MPX-connectors and joiners are identical. This makes it possible to use the VANTAGE wings on the VracE fuselage. It is correct that the MPX-connectors have been swapped on the VracE. This was a feedback from many pilots and the modified version now also corresponds to my personal preference: the current-carrying contacts in the fuselage are now better protected and short circuits cannot happen so easily. Since the conversion of the MPX-connector on the VANTAGE wing is quite simple and the advantages outweigh the disadvantages in my opinion, I deliberately pushed for this change.

I think that the VANTAGE wing harmonizes very well with the VracE fuselage and tail unit and I assume that CCM will probably install suitable MPX plugs when the corresponding orders are placed.

The KST-HS08 should fit quite good in the fuselage. I personally use the MKS HV75 in my VracE, but here you have to make a new servoplate. I saw one VracE with KST MS320 in the fuselage but it´s quite narrow :)
edit: I recommend CG 102mm

 

We recommend the following servos-

  • Fuse- KST HS08A, KST CM509MG, MKS 6120
  • Ailerons- KST X10 Mini Or Pro Mini
  • Flaps- KST X10 Mini or X10 Or Pro

Battery-

  • Consider Li-Ion 18500 2s pack

Specs-

  • Length- 1350 mm 
  • Wing Span- 2987 mm
  • Wing Area-56.55 dm2
  • Tail Area- 5.8 dm2
  • Nose cut for 30mm firewall
  • Ailerons, Flaps, Rudder, Elevator, Throttle- 7 Channel control
  • Ballast capable, includes 20- 87g slugs (1740 g total)
  • Includes dual carbon wing joiner
  • All protective covers included
  • IDS Installed at factory

CG- 100-102mm from LE

Payment & Security

American Express Diners Club Discover Meta Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed