Dual Battery Magnetic Switch 7A

ZepsusSKU: ZEPD07A

$ 53.99
Sold out


Dual Battery Magnetic Switch 7A
Small, strong and super reliable.

This is a very small power switch designed for F5J competition model gliders. The Dual Battery provide redundant functionality, witch again provide security. The switch simply selects the battery or BEC with the highest voltage. If the voltage is the same, the power is drawn from both batteries or BEC’s. If one battery or BEC is removed or short-circuit, it will not affect the other battey or the output voltage. The idea is to use 1S Lipo/4S NiMH or 2S RX lipo depending on whether RX lipo should be the main RX battey (2S) or backup battery (1S Liop/4S NiMH). It is of course also possible to use other rx supplie eg. 5.5volt bec. As with all the other switch, with this switch your RC model can be turned on or off without your need to access it internally. Just move a magnet over the switch, on the outside of the model, and it turns on. To turn it off just pass the magnet by the switch again. The switch has an ultra low power consumption in off-state. The consumption is so low that the switch can be connected to a 1000mAh battery for several years without discharging it. The switch has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protects the switch against power glitch caused by bad battery connection etc.

Technical Data
Designed for 2-3s Lipo/Liion/LiFe or 4-8s NiMH/NiCD batteries and BEC 5-8.4Volt
Input voltage range: 3v~13v
Ultra low dropout voltage: 33mV@7A
Signal passthrough for one Speedcontroller
Output current constant: 7A @ +25C ambient temperature
Output current burst: >20A
Ultra low stand-by current: 30µA (micro-ampere)
Wire: high-quality 0.5mm2 / AWG 20
Connectors: JR-type
Dimensions: 28 x 14 x 6 mm / 1.10 x 0.55 x 0.23 in
Weight: 1.8g / 0.06 oz
Weight including cables: 11.1 grams / 0.39 oz
Length including cables: 27 cm / 10.6 in
Operational temperature range: -40C to +85C

Production test
All switches have been tested with 10A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made.

We recommend the New Smart Magnet Holder for all our products.

Price includes
Magnet and Stickers

Payment & Security

American Express Diners Club Discover Meta Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed