Toy 2M X-Tail Electric Neon Green/Carbon, Light, IDS Installed

Toy 2M X-Tail Electric Neon Orange/Carbon, Light, IDS Installed

Includes pre-installed Servorahmen IDS. 

• For KST X08H/X08H Plus, A08H Ailerons
• For KST X10 Mini Flaps

Servos not included!

X-tail-

The new X-tail design is very well thought out! Easy to assemble with ball links on the rudder and elevator. Only one screw is needed to mount the entire assembly on to the fuselage.  

Electric Fuse-

The all new Electric version of the Toy 2M features a unique 2-piece fuselage design that makes transportation easy and also allows for plenty of space in the nose for motor/esc/lipo. The boom locks into the nose and is held on with tape. We recommend a tape that does not flex. Electrical tape would not be a good choice. The Boom has pre-molded servo pockets for KST X08H servos. 
The nose is cut to 28mm from the factory and you could cut back to 32mm if needed.

Get the light/Spread Tow version if you want a great all around sport model that is capable of fast flight, mild aerobatics or use it to catch some thermals!

New for 2019 from CCM in Ukraine. The Toy 2m can slope, thermal, race, or just sport fly!  Available in two versions, spread tow (light) and standard carbon (hard). The spread tow version is lighter and suitable for light to medium slope lift. Swap out the 5 degree wing joiner for the 10 degree joiner and go hunt down some thermals!

The standard carbon Toy is heavier and stiffer and more suited for strong slope lift with max ballast loads. 

High level of prefabrication and quality second to none! The wings and fuselage have wire harnesses installed and carbon pushrods installed. Unique "solid core" style hinge line on all surfaces means you won't jam pesky epoxy wipers in top wings skins. If you want gap seals just use tape, really simple! Brass control horns pre-installed in wind surfaces and ball joints pre-installed in V-tails. 

We recommend the following servos-

• Fuse- KST X08H V5, V6 or A08H

Specs-

• Length- 1270 mm 
• Wing Span- 2000 mm
• Wing Area-32.4 dm2
• Wing Airfoil HN352 Mod
• Tail Airfoil HT08 Mod
• 2 Sets of wing joiners, 5 degree and 10 degree
• Ailerons, Flaps, Rudder, Elevator- 6 Channel control
• Ballast capable, includes 6 slugs, 115 grams each (690 g total)
• All protective covers included

Empty parts weights (in grams)-

Spread Tow (light) 600-630 grams 

• Wings 210-218 each panel
• Fuse 130-140 (with harness)
• Canopy 4
• Tail 10-13 each panel
• Joiners 24-28 per joiner

Standard Carbon (hard) 825-900

• Wings 310-330 each panel
• V-Tail Fuse 130-140 (with harness), X-Tail Fuse 165-175
• Canopy 4
• Tail 15-18 each panel, X-Tail- Elevator 18-22, Rudder 14-17
• Joiners 40-45 per joiner

Recommended Settings-

• Speed 1 degree reflex
• Thermal 1  4 degrees 
• Thermal 2   6 degrees
• CG- 85-90mm from LE